GM-501EPS
SELF-PROPELLED CENTER LINE MARKER (LPG Engine)
%E3%81%AE%E3%82%B3%E3%83%94%E3%83%BC.png)
Automatic hydraulic engine system
Easy application to an upward slope on a downhill road. Stable application with a free by HST unit.
Smooth and operative application
Adjust forward, reverse, stop and speed by only one lever action.
Low vibration, noise and high efficient engine
No influence to the line width from vibration. Adoption of a 4-stroke OHV engine using LPG which is different from the conventional engine type, safer and more convenient.
Machine of a compact size
Almost same size with the hand type application machine.
Exchange of the material tank
Quick exchange allows easy change of color.
About the machine.
Comfortable start-up and highly flexible and fine speed adjustment. Stable speed can be maintained even when climbing uphill or downhill. Contributes to increased work efficiency and reduces the burden on the operator.
Near wheel lock brakes
Parking brake to prevent driving off on slopes (optional).
Flexible bead nozzle bracket
Adjustment of the bead spreading position can be helpful (optional).
Headlamp(LED)
Highly efficient, power-saving and long-life LED lamps are used to illuminate the front of the vehicle very brightly.
Hand-operated guide bar
Guide bar can be easily operated up and down at hand (optional).
Category | SPEC |
|---|---|
Length | 1290 mm |
Width | 850 mm (when fitted with 15cm wide applicator) |
Height | 1070 mm |
Weight | 225 kg (when fitted with 15cm wide applicator) |
Engine type | HONDA Air cooled 4-stroke LPG engine |
Engine spec. | OHV 163 cc Max. Output 4.4 PS |
Fuel | LPG |
Driven application | Hydraulic speed trnansmission (HST) |
Speed | Forward for 0 - 4 Km/h , Reverse 0 - 2 Km/h |
Upward slope | Max. 15 degrees (26.8%) |
LPG cylinder | 10 kg (or 15kg) |
Material | Thermoplastic hot-applied paint |
Application | Extrusion Die |
Material tank capacity | 66 liter (120kg) |
Glass beads box capacity | 7.7 liter (10kg) |
Applicable line width | 4", 8", 10" and 12". |
GM-EY20
CENTER LINE MARKER
Exchange of the material tank. Quick exchange allows easy change of color.
With a simple action, the rear wheel can be locked for marking a straight line, and can be unlocked
for universal movement that facilitates marking a curved line or various figures on the road.
The marker is also fitted with an automatic glass beads distribution device, which provides ideal
distribution of glass beads on the freshly laid thermoplastic road lines.
The line width can be changed easily by exchanging the line applicator for the appropriate one with
the designated line width.
Heavy-duty steel applicator with jet burners to apply lines and retain heat.
About the machine
The weight balance between the main unit and the slitter is properly maintained, providing excellent manoeuvrability during installation.
Quick lever
The slitter boom can now be easily adjusted using the quick lever.
Fire power adjustment dial
The adjustment dials have been integrated into the handwheel, making them even easier to use.
Rear wheel locking brake
Parking brake to prevent running off on slopes.
Category | Spec |
|---|---|
Length | 1205 mm |
Width | 760 mm (when fitted with 10cm wide applicator) |
Height | 980 mm |
Weight | 125 kg (when fitted with 10cm wide applicator) |
LPG cylinder | 10 kg (or 15kg) |
Material | Thermoplastic hot-applied paint |
Application | Extrusion Die |
Material tank capacity | 55 liter (100kg) |
Glass beads box capacity | 7.7 liter (10kg) |
Applicable line width | 4", 8", 10" and 12". |
GM-450SR,GM-400SR,GM-300SR
ZEBRA MARKER (for Crosswalk line)
Small size and the handling is easy.
It is possible marking until limit the curb, because the thickness of the beads dispenser is thin.
The slit box is assembled with the parts that used the special material that did the heat treatment by advanced technology. Therefore, the finish of the line is very good.
It is possible the repair quickly with the parts exchange.
About the machine.
Main unit construction suitable for constructing pedestrian crossings and stop lines, enabling lines to be started from the edge of the road or in between, against road kerbs and other obstacles.
Simple, easy-to-operate pedals
The main body of the installation machine is placed on the road surface during installation.
Large capacity bead tank
The glass bead tank has a large capacity to meet construction needs.
Gas burner for heat insulation
The molten paint material inside the machine is kept warm to optimise the paint condition.
Category | GM-450SR | GM-400SR | GM-300SR |
|---|---|---|---|
Length | 1230 mm | 1230 mm | 1030 mm |
Width | 770 mm | 720 mm | 620 mm |
Heigh | 1000 mm | 1000 mm | 1000 mm |
Weight | 118 kg | 110 kg | 102 kg |
LPG cylinder | 10 kg | 10 kg | 10 kg |
Material tank capacity | 68 kg | 60 kg | 45 kg |
Glass beads box capacity | 7 kg | 4.3 kg | 4.5 kg |
Applicable line width | 18in. | 16in. | 12in. |
GP-30HDS
PORTABLE AIRLESS PAINT STRIPER
Because the large aperture nozzle can be used in spite of the suction type pump, high speed work and wide width line(45cm) are enabled.
Stability of line width is very excellent by the large volume accumulator and the return valve with original bypass nozzle.
All the wheels are pneumatic tire for smooth operation and stability.
With a simple action, the rear wheel can be locked for marking a straight line, and can be unlocked for universal movement that facilitates marking a curved line or various figures on the road.
A hot paint is able to use by adding the heat circuit and making heat keep structure. (Option)
About the machine
Equipped with a large high-pressure chamber and our unique return circuit, a good quality, clean line with no width fluctuations can be installed from the start of spraying.
High-pressure pneumatic tyres
Improved stability by reducing impact due to road conditions and external forces while driving.
Powerful high-capacity pump
Despite being a suction system, high-speed construction and wide line construction with large-diameter nozzles (max. 45 cm) are possible according to the construction application.
Hot paint available
The addition of a customisable optional heat circuit provides the structure with heating and heat retention functions, enabling the use of hot paint.
Category | Spec |
|---|---|
Length | 1145 mm |
Width | 805 mm |
Height | 865 mm |
Weight | 100 kg |
Engine type | Air cooled 4-stroke gasoline Max.Outout 3.5 HP |
Pump | Diaphragm Airless/ Max. 7.2 liter/min. / Max. 14 Mp |
Glass beads box capacity | 11 kg |
Applicable line width | 2" to 18". |
GLC-20HD
LINE ERASER
Outstanding durability of grinding cutter assembly composed of ultra-hard alloys.
Doubled erasing capacity by minimizing frequent, troublesome replacement of grinding cutters.
Smooth operation with easy, simple handling.
Latest model in pursuit of the best road surface finish
Cutter height adjustment function on the back of the main unit to prevent over cutting, taking into account damage to the road surface.
Improved engine performance.
The HONDA GXV390 is used, with technology optimised for heavy-duty work and improved erasing capacity.
Adjustable tilt lever
The adjustable tilt lever allows the grip position to be changed to suit the operator's body shape.
Body structure that is easy to swing
The machine body can be swung easily to the left or right, allowing even wide marking lines to be erased cleanly.
Category | Spec |
|---|---|
Length | 1130 mm |
Width | 520 mm |
Height | 1100 mm |
Weight | 193 kg |
Engine type | HONDA Air cooled 4-stroke gasoline Max.Outout 11.0HP |
Cutter Head | Tungsten Carbide or Hardened Steel |